Non flammable Glue For Interior Decoration Sofa Sponge Foam
Furniture
| Main ingredients | SBS rubber, Superfine Resin, solvent oil, fireproof solvent |
| Operation | Manual + Automatic Spray |
| Adhesive type | Synthetic rubber based Adhesive |
| Tack time | 1-15mins |
| Solid content | 30%-34% |
| Viscosity(25 ℃) | 50-130mPa.s |
| Heat resistance | 60 ℃ |
| Gravity | 1.15-1.25 |
| Shear Strength | 30 minutes ≥ 0.7 mpa |
| Coverage | 185-250g/m2 |
Bonding
The application should be done once and for all. Aim the two
surfaces, bond together and press. Don’t move the bonding surfaces
back and forth, or the bonding effect will be affected.
Airing
After the application of the adhesive, enough time should be given
to let the solvent evaporate completely to avoid bubbles or
stickiness. The airing time is about 5-15 minutes/25C and varies on
the temperature, humidity, and adhesive film. The bonding can be
done after the surface is dry by touch. For porous materials, you
can bond directly after the application of the adhesive.
Remarks
1. Seal it tightly and store it in a cool and well-ventilated place
where the temperature is between 5℃ -35℃ and the relative humidity
is ≤80%. Don’t expose it to the sun.
2. Volatile solvent contained. Do not swallow. Keep it far away from open fire because of the volatile
solvent in it which is inflammable and out of reach of the
children. The room should be well-ventilated during application.
3. No. of Regulation On Transporting Dangerous Goods: 32196
Tack time
The term "tack time" typically refers to the amount of time it
takes for an adhesive such as glue to reach its initial bond
strength after application. The tack time of glue can vary
depending on several factors, including the type of glue used, the
materials being bonded, and the environmental conditions.
Different types of glue have different tack times. For example,
some quick-setting adhesives may have a tack time of just a few
seconds, while others may require several minutes or even hours to
reach their full bonding strength. It's important to consult the
manufacturer's instructions or product specifications for specific
information on the tack time of a particular glue.
Additionally, factors such as temperature, humidity, and the
porosity of the materials being bonded can affect the tack time of
glue. Higher temperatures and humidity levels generally accelerate
the curing process and reduce the tack time, while lower
temperatures and drier conditions may increase the tack time.
To ensure proper bonding, it's recommended to follow the
instructions provided by the glue manufacturer, including the
recommended curing or drying time. This will help ensure that the
adhesive has sufficient tack time to form a strong bond between the
materials.
